Carborundum grinding barrel is a carborundum ceramic product, it has a very low abrasion, can prevent material pollution, but also has a very high grinding efficiency, suitable for all kinds of grinding and dispersing occasions, long service life, low comprehensive operation cost.

Silicon carbide grinding drum manufacturer, silicon carbide grinding drum supplier - Shandong Jinhangda New Material Co., LTD.

1. Always pay attention to the operation of the equipment when using the silicon carbide grinding barrel. If there is any abnormal situation, stop the operation and check the reason.

2. When not in use, the silicon carbide grinding barrel should be stored in a relatively dry place to avoid dampening of the grinding barrel. If the aluminum spray layer at the end of the grinding barrel is found to have fallen off due to moisture, it should be re-sprayed with aluminum, or it can be used after the aluminum spray wiring section of the rod wraps the aluminum foil.

3. When we use the silicon carbide grinding barrel, we should not overload the use. If there are bubbles on the surface during the use, it is generally because the grinding barrel temperature is too high and the reaction occurs with harmful substances, then we should reduce the temperature and reduce the contact with harmful substances.

4. In order to keep the furnace temperature normal, the service voltage should be gradually increased with the increase of the resistance value of the grinding drum during the process of using. When the voltage is increased to the extent that the transformer silicon carbide product equipment used is over-aged, the furnace should be stopped and replaced with a new one.