Quick Details
Place of Origin: China (Mainland)
Type: Insulation Tape
Material: Silicone rubber
Application: High Voltage
Rated Voltage: 15.75KV/mm
Tensile Strength: 950 PSI, +/- 25
PSIElongation,
Min.: 300%
Water Absorbtion, Max.: 3%
By Weight
Operating temperature range: -65° C to 260° C
Bond Strength, Min.: 2 lbs
Specifications
Silicone Rubber Self-fusing Tape
1. Working temperature: -65~260 ceti degree
2. Tensile Strength, Min.: 700 PSI
3. Self-fusing
Silicone Rubber Self-fusing Tape
1. Working temperature: -65~260 ceti degree
2. Tensile Strength, Min.: 700 PSI
3. Self-fusing
Self-Fusing Silicone Tape is made of the highest quality materials for a permanent air-tight and water-tight seal in emergency situations. It is designed for quick plumbing repairs, sealing hoses in your car/truck/boat, coating the ends of rope, sealing the hatch of a space shuttle as it re-enters earth's atmosphere, wrapping tool handles, emergency O-ring seals or to insulate electrical wiring. It resists fuels, acids, oils, solvents, salt water, road salt and UV rays.

Main Properties:

1. Thickness: 0.3mm~ 1.5mm

2. Width: 10mm~50mm

3. Length/Roll: Normal package 3 or 20 meters

4. Standard color: Black, Red, Yellow, White, Blue, Green,

5. Operating temperature: -50° C~250° C

6. Flame-retardant

7. OEM service

8. Standard package: 1 roll per box

Application:

1. Emergency Radiator Hose Repair

2. Insulate electrical wiring

3. Corrosion Protection

Directions

1. ) Wrap Self-Fusing Silicone Tape around project by stretching and overlapping onto itself. Stretch at least double to ensure a good bond; For high pressure leaks stretch to maximum amount. The tighter Silicone Tape is wrapped, the quicker and stronger the bond.

2. ) Continue wrapping Silicone Tape around project by overlapping 75% onto itself so that 2/3 the width is covered with the next wrap. The first and last wrap should completely overlap onto the previous wrap for a complete bond. Additional layers may be necessary, and the same process should be used over the previous layers. Silicone Tape works on either side.

3. ) Repositioning Silicone Tape is only appropriate in the first few seconds after wrapping. Attempting to reposition Silicone Tape after 1 minute or longer is not recommended. Silicone Tape is not reusable; However, additional Silicone Tape can be applied over project at any time in the future.