Many Material Are Available: EPDM, NBR, HNBR, Silicon Rubber, FKM
Support Mixed Batch: Small Order Is Welcome
Trademark: sanshi
Specification: 200
HS Code: 4016101000
Material: Nitrile Rubber
Effect: Wellendichtring
High Quaitity: Specification Are Completed
Size:Is From 10mm to 1500mm: Metric Size and England Size Are Available
We Can Make Mold by Ourselves: Mold Is for Free
Transport Package: Plastic and Carton
Origin: Hebei
Product Description
Specifications: We can provide more than 1000 different sizes at AS568, BS, JIS series and other national standard O rings in Nitrile (NBR), Silicone(MVQ), EPDM, HNBR, Viton (FKM), Neoprene,CR materials and so on. Hardness range from 40 to 90 Shore A. We can also supply many other non standard and colours (blue, brown, grey, red, white, yellow, green) o rings as your requirements.
Rubber NBR O Ring
Nitrile (or NBR) O-Rings are most commonly available and are cost effective. Ideal for use as seals on pumps, drive belts, and other general engineering applications.NBR is good for applications that need to withstand fats, Greases and high temperature (+70°C). Temperature Range -30°C to +120°C (avoid prolonged use at higher extremes) Suitable for: Many hydrocarbons, fats, oils gasoline, petroleum based hydraulic fluid etc
Mechanical Properties
Colour
Black or colours
Material
Nitrile (NBR)
Cross Section Type
Circular
O-ring type
AS568,JIS, BS,EN Standard.
Hardness (Shore A)
65-75
Operating Temperature Range (°C)
"-30 to +120"
Tensile Strength(MPA)
14
Elogation At Break(%)
385
Specific Gravity
1.2
Rubber Viton O Ring
Viton (FKM) O Rings have a low compression set and have high temperature and chemical resistance. More expensive than NBR O Rings. The terms FPM, FKM and Viton very often cause confusion and lead to incorrect interpretations. All of these designations actually stand for one single base material: fluoro rubber.Temperature Range -30°C to +200°C (avoid prolonged use at higher extremes)
Mechanical Properties
Colour
Black or colours
Material
Viton(FKM)
Cross Section Type
Circular
O-ring type
AS568,JIS, BS,EN Standard.
Hardness (Shore A)
65-75
Operating Temperature Range (°C)
"-20 to +210"
Tensile Strength(MPA)
12
Elogation At Break(%)
210
Specific Gravity
1.85
Rubber EPDM O Ring
Excellent resistance to weathering and ozone, water and steam, with good performance in castor and some phosphate ester based fluids. Its low and high temperature capability is good, having excellent resistance to set with good resilience. Also high temperature braking systems employing castor based fluids for mouldings subjected to weathering and ozone and for seals in chemical plant due to its good chemical resistance. EPDM is particularly useful when sealing phosphate-ester hydraulic fluids and in brake systems that use fluids having a glycol or silicone base. This results in a highly fluorinated elastomeric compound with exceptional temperature resistance, compatibility with a wide range of aggressive chemical combinations and outstanding resistance to permanent deformation. Chemical resistance Hot water and steam up to 149°C with special compounds up to 260°C Glycol based brake fluids (Dot 3 & 4) and silicone-based brake fluids (Dot 5) up to 149°C Many organic and inorganic acids Cleaning agents, sodium and potassium alkalis Phosphate-ester based hydraulic fluids (HFD-R) Silicone oil and grease Many polar solvents (alcohols, ketones, esters) Ozone, aging and weather resistant
Rubber Silicon O Ring
Silicone possess excellent resistance to temperature extremes. Silicone's retention of properties at high temperatures is superior to other elastic materials. Silicone has poor tensile strength, tear resistance and abrasion resistance. Chemical resistance Dry heat High - aniline point oils Chlorinated DI - phenyls Food processing applications Excellent ozone resistance. Water (Low temperature only)
Mechanical Properties
Colour
Black or colours
Material
SILICON
Cross Section Type
Circular
O-ring type
AS568,JIS, BS,EN Standard.
Hardness (Shore A)
65-75
Operating Temperature Range (°C)
"-60 to +210"
Tensile Strength(MPA)
7.5
Elogation At Break(%)
220
Specific Gravity
1.35
Mechanical Properties
Colour
Black or colours
Material
EPDM
Cross Section Type
Circular
O-ring type
AS568,JIS, BS,EN Standard.
Hardness (Shore A)
65-75
Operating Temperature Range (°C)
"-40 to +140"
Tensile Strength(MPA)
14
Elogation At Break(%)
385
Specific Gravity
1.2
Rubber HNBR O Ring
Hydrogenated nitrile is a synthetic polymer that results from the hydrogenation of nitrile rubber (NBR). This gives it superior mechanical characteristics, particularly high strength, greater thermal stability and helps reduce extrusion and wear. Chemical resistance Aliphatic hydrocarbons Vegetable and animal fats and oils HFA, HFB and HFC hydraulic fluids Dilute acids, bases and salt solutions at moderate temperatures Water and steam up to 149°C (300°F) Ozone, aging and weathering
Our factory introduction: We have been engaged in rubber o rings and rubber parts industries for more than 10 years, We mainly specialize in producing different types of o-rings, rubber washers, rubber gaskets, customized rubber parts products.The materials are available in NBR, VITON, EPDM,SILICON,HNBR,CR,SBR and all other popular rubbers.We have more than one thousand available O-ring moulds and can open new moulds as customers' drawings.
Our rubber O rings and other rubber parts can meet ROHS,CE,PAHS requirements and have a big market around the world.
NO.
spec.
NO.
()
1
5x1.9
1.7
0.07
26
40x3.1
34.5
0.32
2
6x1.9
2.7
0.07
27
45x3.1
39.5
0.35
3
7x1.9
3.7
0.07
28
50x3.1
44.5
0.35
4
8x1.9
4.7
0.08
29
55x3.1
49.5
0.45
5
9x1.9
5.7
0.08
30
60x3.1
54.5
0.45
6
10x1.9
6.7
0.09
31
63x3.1
57.5
0.50
7
11x1.9
7.7
0.10
32
65x3.1
59.5
0.50
8
12x1.9
8.7
0.10
33
68x3.1
62.5
0.60
9
13x1.9
9.7
0.10
34
70x3.1
64.5
0.60
10
14x1.9
10.7
0.10
35
75x3.1
69.5
0.65
11
14x2.4
9.6
0.12
36
80x3.1
74.5
0.65
12
15x2.4
10.6
0.13
37
85x3.1
79.5
0.70
13
16x2.4
11.6
0.13
38
90x3.1
84.5
0.70
14
18x2.4
13.6
0.14
39
95x3.1
89.5
0.80
15
19x2.4
14.6
0.15
40
100x3.1
94.5
0.80
16
20x2.4
15.6
0.15
41
105x3.1
99.5
0.85
17
22x2.4
17.6
0.18
42
110x3.1
104.4
0.85
18
24x2.4
19.6
0.20
43
115x3.1
109.5
0.90
19
25x2.4
20.6
0.22
44
120x3.1
114.5
0.90
20
26x2.4
21.6
0.22
45
125x3.1
119.5
1.00
21
28x3.1
22.5
0.28
46
130x3.1
124.5
1.10
22
30x3.1
24.5
0.28
47
135x3.1
129.5
1.15
23
32x3.1
26.5
0.30
48
140x3.1
134.5
1.20
24
35x3.1
29.5
0.30
49
145x3.1
139.5
1.25
25
38x3.1
32.5
0.32
50
150x3.1
144.5
1.30
(),(,).
()
()
51
155x3.1
149.5
1.35
76
60x5.7
49.4
0.60
52
160x3.1
154.5
1.40
77
63x5.7
52.4
0.62
53
165x3.1
159.5
1.50
78
65x5.7
54.4
0.65
54
28x3.5
21.6
0.30
79
70x5.7
59.4
0.70
55
30x3.5
23.6
0.30
80
73x5.7
62.4
0.72
56
31x3.5
24.6
0.31
81
75x5.7
64.4
0.75
57
32x3.5
25.6
0.32
82
80x5.7
69.4
0.80
58
34x3.5
27.6
0.33
83
85x5.7
74.4
0.85
59
35x3.5
28.6
0.34
84
90x5.7
79.4
0.90
60
36x3.5
29.6
0.35
85
95x5.7
84.4
0.95
61
38x3.5
31.6
0.36
86
100x5.7
89.4
1.00
62
40x3.5
33.6
0.38
87
105x5.7
94.4
1.05
63
41x3.5
34.6
0.40
88
110x5.7
99.4
1.10
64
42x3.5
35.6
0.42
89
115x5.7
104.4
1.15
65
44x3.5
37.6
0.43
90
120x5.7
109.4
1.20
66
45x3.5
38.6
0.44
91
125x5.7
114.4
1.25
67
46x3.5
39.6
0.45
92
130x5.7
119.4
1.30
68
48x3.5
41.6
0.45
93
135x5.7
124.4
1.35
69
50x3.5
43.6
0.45
94
140x5.7
129.4
1.45
70
51x3.5
44.6
0.45
95
145x5.7
134.4
1.50
71
54x3.5
47.6
0.45
96
150x5.7
139.4
1.55
72
55x3.5
48.6
0.50
97
155x5.7
144.4
1.60
73
56x3.5
49.6
0.50
98
160x5.7
Rubber Part, Oil Seal, Rubber Gasket manufacturer / supplier in China, offering Cotton Reinforced V Type Rubber Seal Gasket, OEM ODM V Shaped Rubber Jacket, NBR Rubber Bearing Sealing for Machines and so on.... View detail
Supplier Assessment Reports are detailed on-line reports about the supplier's capabilities. It helps you get all the information you need to trade confidently with suppliers
English