As a new environmental protection equipment, waste tire pyrolysis plant has attracted the attention of countless investors in recent years. Many people will have such questions before investing in a project. Will this investment be profitable? For the waste tire cracking equipment is no exception, even as a new thing, the question caused by it is much higher than other equipment! Here for everyone to share science, waste tire pyrolysis plant is the use of pyrolysis chemical reactions, the process of cracking waste tires into fuel oil, carbon black, steel wire, combustible gas.

Why waste refinery is so hot now? The birth of any new things represents the demise of old things. On the one hand, the increase in the energy crisis, on the other hand, millions of tons of scrap tires a year does pose a great threat to our living environment. Scrap tire pyrolysis plant was developed based on these two serious social issues.

Now we will answer the questions about the return on investment and profit analysis of scrap tire oil refining equipment that most investors are most concerned about. Take 10 tons of equipment as an example:

Through this form you can clearly see that running our equipment will be able to recover equipment investment costs in a month. And later, it will give you a steady stream of benefits! !

Many people will be surprised to see this data, even beyond belief, will feel curious that the product cracked from waste tire pyrolysis plant has such a huge profit? Yes, fuel oil, carbon black, steel wire, and combustible gas that are cracked will be used in all aspects of life. The specific uses are as follows:

1. Fuel: Fuel oil is widely used in marine boiler fuels, furnace fuels, metallurgical furnaces, and other industrial furnace fuels. According to use, fuel oil can be divided into marine fuel oil, furnace fuel oil and other fuel oils. According to statistics from the National Bureau of Statistics, China's fuel oil consumption is mainly concentrated in power generation, transportation, metallurgy, chemical industry, light industry and other industries.

2. Carbon black: mainly used for pressure ball combustion, or refined milling. Among them, finely ground powder can be used for the production of new tires, rubber soles, and pigments.

3. Steel wire: It is mainly recycled directly by the waste factory or recast.

4. Combustible gas: It will be recycled by the equipment and reused in the heating raw materials of the reactor. This will not only save energy, but also avoid secondary pollution to the environment after these gases are discharged.

Through the introduction of the use of these products, you may not know that these products with such a wide range of uses are actually produced by cracking equipment.

1. Collect enough waste tires to contact the local garbage collection facility.

2. The collected waste tires are fed into the reactor via an automatic pusher and heated. When the temperature rises to a certain height, heavy oil and gas are cracked.

3. Under the effect of high and low pressure inside the equipment, these oil and gas will enter the condensing system, and then be liquefied into heavy oil and fall into the reactor.

4. The final fuel oil is obtained after deodorizing and deodorizing the obtained heavy oil.

5. The carbon black produced in the cracking process will be automatically discharged outside the furnace through the underground sealed slag discharge channel, which can ensure that the carbon black that is excluded will not fly and cause secondary pollution to the air.

Making a new investment is a bold attempt. As a senior expert in the oil refining industry, here is to give you some suggestions accumulated in the oil refining industry for many years. The choice of pyrolysis plant mainly depends on two aspects. First, the oil output rate is related to your return on investment; Second, refining The EIA of the equipment passed the clearance. It's about whether you can successfully get the return on investment you expect. A detailed analysis of the DoingGroup's v pyrolysis plant on these two aspects:

1. Use the most advanced and effective condensers in the oil industry today. This condensation, also known as a three-stage cooling system, uses tube condensation to ensure that the cracked oil and gas is fully cooled and the oil yield is high.

2. The device has a vacuum device. This device can provide negative pressure on the one hand, divert oil and gas, and increase the oil output rate. On the other hand, it is an important safety device like oil-water separator and water seal.

3. At each stage, the temperature is controlled rigorously and accurately, ensuring that at a specific temperature, the oil output rate has the greatest guarantee.

4. The entire equipment, whether it is cooling water or dedusting water, adopts circulating water to ensure zero discharge of waste water in the production process.

5. Considering that some customers use fuels with coal, heavy oil, or large amounts of smoke, the equipment can also be equipped with pulse dust collectors and dry dust collectors that do not require water, so there will not be any discharge of waste water.

6. For the tail gas produced in the oil refining process, it is divided into two parts. Part of the non-condensable gas will be recycled by the equipment and reused in the heating fuel of the reactor; the other part has a small amount of polluting gas, which will be introduced by the company. The desulfurization and deodorization tower system is processed. Therefore, the pollution to the environment is avoided.

Through the above analysis, I believe it is not difficult for you to find that the DoingGroup's oil pyrolysis plant can not only guarantee a higher oil yield, but also treat the industrial wastes in full accordance with the national environmental assessment test standards. In addition, we have a team of professional engineers to provide on-site installation guidance services and equipment operation tests. DoingGroup's waste tire pyrolysis plant is the best choice for your investment and will bring you huge profits! !

Contact: Ms Bonnie

Phone: +86-371-5677 1821

Mobile/Wechat/Whatsapp:0086-135-2669-2320

Skype: bonniezhao2

Email: oilmachine@doinggroup.com

http://www.doinggroup.com

http://www.china-doing.com

http://www.wastetireoil.com

http://www.continuouspyrolysisplant.com